Load data for 9 x 18 (Ultra) + .357 | 135gr | Speer HPSB GD

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.357 \| 135gr \| Speer HPSB GD
Manufacturer SKU:	4014
Bullet Weight:	135gr \| 8.7g
Bullet Diameter:	0.357" \| 9.07mm
Bullet Length:	0.580" \| 14.7mm
Caliber:	9 x 18 (Ultra) load data
Case Length (l3):	0.705" \| 17.9mm
Cartridge Length (C.O.L.):	0.989" \| 25.1mm
Seated Depth:	0.296" \| 7.5mm
Shank Seated Depth:	0.296" \| 7.5mm
Case Capacity:	12.6 Grains of Water \| 0.82 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	26107 psi \| 1800 bar
LID:	LID_B6219_C1230
Last updated:	2025-01-01

Load data for 78 loads in caliber 9 x 18 (Ultra) with .357 | 135gr | Speer HPSB GD bullet and 39 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	83%	22249	85%	**9	99%
ADI APS 350	<<locked>>	76%	21727	83%	**8	100%
ADI APS 450	<<locked>>	82%	23395	90%	**7	100%
ADI AS 30	<<locked>>	89%	22771	87%	**0	100%
ADI AS 50N	<<locked>>	85%	21553	83%	**3	100%
[Accurate No. 2]*	<<locked>>	84%	20668	79%	**7	88%
Accurate Solo 1000	<<locked>>	83%	21132	81%	**4	100%
Accurate Solo 1250	<<locked>>	94%	20001	77%	**3	98%
Alliant BULLSEYE	<<locked>>	84%	22524	86%	**6	94%
Alliant UNIQUE	<<locked>>	97%	20131	77%	**6	93%
Baschieri & Pellagri 100	<<locked>>	88%	20566	79%	**0	100%
Hodgdon Clays	<<locked>>	76%	21741	83%	**1	100%
Hodgdon HP38	<<locked>>	67%	21930	84%	**6	99%
[Hodgdon Longshot]*	<<locked>>	78%	22466	86%	**2	84%
Hodgdon Universal 👍	<<locked>>	92%	22249	85%	**9	99%
Lovex S011	<<locked>>	73%	20508	79%	**7	99%
Lovex S020	<<locked>>	90%	21306	82%	**6	95%
Maxam CSB 1	<<locked>>	94%	18869	72%	**0	97%
Maxam CSB 2	<<locked>>	92%	15650	60%	**3	100%
Maxam CSB 3	<<locked>>	91%	20900	80%	**6	100%
Maxam CSB 4	<<locked>>	87%	21045	81%	**7	100%
Maxam CSB 5	<<locked>>	85%	22829	87%	**0	100%
Ramshot Silhouette	<<locked>>	83%	23264	89%	**9	91%
[Ramshot True Blue]*	<<locked>>	78%	23279	89%	**9	85%
Ramshot Zip	<<locked>>	66%	20784	80%	**6	99%
ReloadSwiss RS 12 👍	<<locked>>	93%	23279	89%	**2	100%
ReloadSwiss RS 20	<<locked>>	93%	16984	65%	**3	92%
Rottweil P 801	<<locked>>	84%	23235	89%	**6	100%
SNPE Vectan A0	<<locked>>	92%	18956	73%	**7	90%
SNPE Vectan BA 9	<<locked>>	90%	23177	89%	**3	97%
SNPE Vectan BA10	<<locked>>	76%	23366	90%	**7	100%
SNPE Vectan BA9 1/2	<<locked>>	92%	21930	84%	**9	98%
Somchem MP200	<<locked>>	89%	21379	82%	**9	91%
Somchem MS200	<<locked>>	96%	22742	87%	**6	95%
Vihtavuori N310	<<locked>>	74%	23482	90%	**7	100%
Vihtavuori N320 👍	<<locked>>	90%	21335	82%	**3	100%
Vihtavuori N330 👍	<<locked>>	96%	21828	84%	**9	99%
Vihtavuori N340	<<locked>>	94%	20291	78%	**6	92%
Winchester 231	<<locked>>	74%	20784	80%	**6	99%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	60%	11458	44%	**2	92%
ADI APS 350	<<locked>>	62%	15418	59%	**9	100%
ADI APS 450	<<locked>>	63%	14663	56%	**6	100%
ADI AS 30	<<locked>>	64%	12328	47%	**9	100%
ADI AS 50N	<<locked>>	62%	12053	46%	**2	97%
[Accurate No. 2]*	<<locked>>	69%	13285	51%	**2	80%
Accurate Solo 1000	<<locked>>	65%	13503	52%	**2	98%
Accurate Solo 1250	<<locked>>	72%	11356	43%	**2	90%
[Alliant BULLSEYE]*	<<locked>>	60%	11487	44%	**2	83%
[Alliant UNIQUE]*	<<locked>>	71%	10791	41%	**9	81%
Baschieri & Pellagri 100	<<locked>>	66%	11429	44%	**3	95%
Hodgdon Clays	<<locked>>	62%	15331	59%	**9	100%
Hodgdon HP38	<<locked>>	63%	19305	74%	**0	99%
[Hodgdon Longshot]*	<<locked>>	72%	18115	69%	**7	81%
[Hodgdon Universal]*	<<locked>>	61%	9834	38%	**9	89%
Lovex S011	<<locked>>	63%	15316	59%	**5	96%
[Lovex S020]*	<<locked>>	66%	10457	40%	**9	84%
[Maxam CSB 1]*	<<locked>>	72%	10791	41%	**6	89%
Maxam CSB 2	<<locked>>	70%	8760	34%	**3	93%
Maxam CSB 3	<<locked>>	68%	11719	45%	**6	95%
Maxam CSB 4	<<locked>>	64%	11487	44%	**6	97%
Maxam CSB 5	<<locked>>	61%	11835	45%	**3	100%
[Ramshot Silhouette]*	<<locked>>	64%	13068	50%	**8	81%
[Ramshot True Blue]*	<<locked>>	71%	18869	72%	**3	81%
Ramshot Zip	<<locked>>	62%	18260	70%	**7	98%
[ReloadSwiss RS 12]²	<<locked>>	59%	8093	31%	**9	95%
[ReloadSwiss RS 20]*	<<locked>>	74%	10428	40%	**6	81%
Rottweil P 801	<<locked>>	61%	11371	44%	**9	100%
[SNPE Vectan A0]*	<<locked>>	72%	11502	44%	**9	81%
[SNPE Vectan BA 9]*	<<locked>>	66%	12459	48%	**2	88%
[SNPE Vectan BA10]²	<<locked>>	59%	14649	56%	**6	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	66%	11284	43%	**6	89%
[Somchem MP200]*	<<locked>>	67%	11763	45%	**6	80%
[Somchem MS200]*	<<locked>>	70%	12169	47%	**6	84%
Vihtavuori N310	<<locked>>	62%	16389	63%	**8	100%
Vihtavuori N320	<<locked>>	62%	9631	37%	**6	96%
[Vihtavuori N330]*	<<locked>>	66%	9485	36%	**3	88%
[Vihtavuori N340]*	<<locked>>	69%	10443	40%	**6	81%
Winchester 231	<<locked>>	61%	13953	53%	**2	95%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data